MGS-250

MGS-250

 

 

>> Datasheet <<
>> User Manual <<
>> Splash Shield Mounting Template <<

 


 

Infrared Refrigerant Gas Detector
  • Long-life, proprietary infrared (NDIR) sensor
  • Detects CFCs, HFCs, HCFCs and new HFO refrigerants
  • No cross interference to other gases, humidity or temperature
  • Modbus RTU interface, analog output, BAS/BMS system connectivity
  • Set all parameters and outputs without opening the unit.

 

Bacharach's MGS-250 Infrared Refrigerant Gas Detector is the leader in performance and flexibility. It can be configured as either a broadband sensor used for gross leak detection, or as a gas-specific version that’s pre-calibrated and characterized for precision response to individual refrigerants. The MGS-250 is the economical solution for detecting refrigerants without the limitations posed by solid-state sensor technologies.

 

Advanced infrared sensing technology makes the MGS-250 immune to cross sensitivities from combustible and toxic gases, as well as changes in temperature and humidity. The infrared sensor provides low-level leak detection and delivers up to 5 to 7 years of virtually maintenance-free operation. The MGS-250 has an alpha-numeric LED display, status indicator, on-board relay, and alarm to alert personnel when levels have exceeded the preset limit.

 

Type

Leak detector using IR sensors

Gases

Refrigerants – CFCs, HCFCs, HFCs, HFOs

Measuring Range

0 to 3,500 ppm

Display

4-digit, 7-segment red LED and green status LED

Output

Analog

4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V

Digital

Modbus RTU via RS 485

Power Supply

24 VDC or 24 VAC; 3- or 4-wire

Relay

1 alarm relay, SPDT

Rating 1 A @ 24 VDC, 0.25 A @ 240 VAC, resistive load

 

Alarm delay 0 to 15 minutes; user-programmable

Ambient Conditions

Temperature

- 22 to +104 °F (- 30 to +40 °C)

Humidity

5 to 90 %RH, non condensing

Altitude

0 to 10,000 ft (3,050 m)

Enclosure

ABS; snap-in cable gland for 0.115 to 0.25” cable

Size (w x h x d)

Approx. 4.0” x 5.5” x 1.5” (100 x 140 x 40 mm)

Weight

Approx. 6.3 oz (180 g)

Approvals

CE, UL, CSA, IEC, EN 61010-1