Monoxor Plus

Monoxor® Plus

>> Datasheet <<
>> User manual (English) <<
>> B-Smart ordering information <<
>> FUS installation/user manual (English) <<

 


 

An advanced carbon monoxide analyzer
  • Fast, accurate measurement of CO for both ambient air and flue gas applications
  • Exclusive B-Smart® pre-calibrated CO sensor for easy field replacement
  • Advanced features like trending display and a 15-minute CO ambient test
  • Available accessories for appliance testing, differential temperature testing, NOx filtering, etc.

The Monoxor® Plus is the perfect tool for home/safety inspectors, maintenance personnel and HVAC contractors who need to monitor CO in ambient air or stack gases. It has many advanced features, including a trending graph with real-time value displayed, minimum and maximum measured values, and ability to log a 15-minute CO ambient test.

The CO sensor is quickly replaced in the field without down time using B-Smart® pre-calibrated sensors. The Monoxor® Plus can also be used to measure ambient and flue gas temperatures, using optional thermocouple accessories. There’s even an available NOx filter to provide more accurate CO readings in flue gas applications.

 

Measurements:

CO

Temperature (optional)[1]

 

0 to 2000 ppm

-4 to 1202 °F (-20 to 650 °C)

Display

Graphic LCD w/backlight

Power

4x AA batteries

Run Time

20 hours minimum (alkaline batteries)

Size (H x W x D)

8.0 x 3.6 x 2.3 in. (20.3 x 9.1 x 5.8 cm)

Weight

1 lb. (0.45 kg) including batteries

Operating Conditions

23 to 113 °F (-5 to 45 °C), 15 to 95% RH (non-condensing), 1 ATM ± 10%

Warm-up Time

30 to 60 seconds

Memory

10 locations

Communications

USB 2.0 (mini-B), IrDA

Approvals

CE mark

Warranty

2 years (including sensor)

 

[1] Temperature measurement requires an optional probe (P/N 0019-7111) or thermocouple (P/N 0104-1797 or 0104-1798)